Scooter Pegs
What are scooter pegs and why use them?
Pegs for scooters are small metal or aluminium tubes mounted on the wheel axles to make it easier to perform grinds, stalls and manuals. They are mainly used on trick and stunt scooters in skateparks and on the street, where control and durability are essential. Here you will find several good options for different setups.
In this category, you will find a solid selection of pegs for different wheel and fork types, allowing you to adapt your setup to your riding style. Whether you want pegs on the front, back or all four wheels, it’s about choosing the right length, the right material and the correct compatibility with your scooter.
How to choose the right pegs
The most important thing when choosing pegs is to make sure they fit your deck, wheels and axle bolts, and that they can withstand your riding style. Pay particular attention to the following points when comparing models:
- Axle and wheel compatibility – check whether the peg fits the axle bolt diameter and wheel width so there is enough space for the wheel, spacer and peg.
- Peg length – shorter pegs are lighter and more stable for technical tricks, while longer pegs provide more room for grinds but can catch more easily on edges.
- Material – aluminium is lightweight and ideal for controlled park tricks, while steel is heavier but more durable for tough street grinds.
- Durability and use – if you ride a lot of rails and curbs, choose pegs made from a strong alloy with solid wall thickness so they do not wear through too quickly.
- Mounting and hardware – check whether longer axle bolts are included or if you need to buy them separately, so you can mount the pegs securely without any play.
Also consider weight versus strength: lighter pegs make the scooter more responsive, but heavier steel pegs often provide more stability and a longer lifespan, especially for experienced riders.
Rider level, style and safe use
Beginners can easily start with pegs, but you need to have mastered basic jumps and balance before attempting grinds. For park riding, many choose shorter and lighter pegs for quick rotations, while street riders often prefer slightly longer and more robust pegs for rails, walls and curbs.
Always use pegs together with an approved helmet and preferably knee and shin protection, as mistakes on rails and edges can easily cause impact injuries. Regularly check that the bolts are properly tightened and that the pegs are not cracked or worn so thin that they could break.
Once you have found the pegs that suit your level and riding style, the next step is to mount them correctly, test them carefully, and then gradually build up your grinds and stalls.