Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

Renew your scooter or make your new scooter unique with a nice design scooter handle from NKDscooter.

The NKD Shadow handle is made of soft but durable rubber, including a unique bar end.

The NKD shadow handle provides a soft and comfortable grip as it is designed with many grooves in the soft rubber. The shadow handles give you a good grip and increased safety when performing your tricks. The length of the shadow handles is 160 mm and fits all trick scooters. In the package, there are two handles and two end plugs, so they are ready to use right away.

Tips on handles:

• Handles are a wear part and should be changed regularly.
• Some models are made of very soft material and need to be changed earlier than others. NKD Shadow is soft material for more comfort, where NKD Diamond (see more here) is medium hard.
• You can cut the handles to length with scissors or use the scissors to remove the old ones.
• Barends, the pieces that sit at the end do not necessarily fit aluminium bars, due to thickness, however, you can cut a slot / crack in your barend and force it on. It is recommended to ride with barends, as it extends the life of the bar, but is not a necessity.

Tips for fitting handles:

• Spray some liquid under the handles and a little on the bar (Dish soap, hairspray or WD40) Let it dry!
• Twist the handle from side to side and pull it off. Handles are possible to reuse, but otherwise cut it off with scissors.
• Do you have an air compressor? Use it to create a layer of air around the handle, it will slide on immediately.
• Fitting handles is easy with a little window cleaner.

NKD octane clamp is an oversized clamp made of aluminium. The clamp has cosmetic carvings and is relatively high with three bolts. It weighs 128 grams.

NKD octane clamp is an oversized clamp made of aluminium. The clamp has cosmetic carvings and is relatively high with three bolts. It weighs 128 grams.

NKD octane clamp is an oversized clamp made of aluminium. The clamp has cosmetic carvings and is relatively high with three bolts. It weighs 128 grams.

With Euroskateshop griptape, you're guaranteed to get griptape of world-class quality. Our many designs ensure that you can find something to suit your style and help you stand out from the crowd. Whether it's colorful or black/white, there's something for you.

Our griptape comes in 152 mm x 584 mm, giving you the option to cut it to the perfect size for your stunt scooter.

With Euroskateshop griptape, you're guaranteed to get griptape of world-class quality. Our many designs ensure that you can find something to suit your style and help you stand out from the crowd. Whether it's colorful or black/white, there's something for you.

Our griptape comes in 152 mm x 584 mm, giving you the option to cut it to the perfect size for your stunt scooter.

With Euroskateshop griptape, you're guaranteed to get griptape of world-class quality. Our many designs ensure that you can find something to suit your style and help you stand out from the crowd. Whether it's colorful or black/white, there's something for you.

Our griptape comes in 152 mm x 584 mm, giving you the option to cut it to the perfect size for your stunt scooter.

With Euroskateshop griptape, you're guaranteed to get griptape of world-class quality. Our many designs ensure that you can find something to suit your style and help you stand out from the crowd. Whether it's colorful or black/white, there's something for you.

Our griptape comes in 152 mm x 584 mm, giving you the option to cut it to the perfect size for your stunt scooter.