Your Page Title

Scooter Pegs

Scooter pegs/Fork pegs


See scooter pegs


The first time you mount pegs on the fork, you need a longer shaft. To be able to determine the length of the new shaft, all you need to do is to measure the distance between the outside of the fork dropouts and add approximately 2.5 cm. If you are considering mounting a peg on each side of the fork, you must add another 1.5 cm to this measurement.

NOTE: Some forks are not made to have pegs mounted. In the case of those types of forks, you need spacers and therefore, you need a longer shaft.
 

Scooter pegs/Spacers for Pegs




Some forks are not designed to have pegs mounted. If you still want to mount pegs on them, you must acquire spacers and of course, a longer shaft.
 

Scooter pegs/Pegs for the rear Wheel




The first time you want to mount pegs on your freestyle scooter, your shaft needs to be longer. In order to determine the length of the new rear shaft, you simply need to measure the distance between the outside of the dropouts and add approximately 2.5 cm. If you want to mount pegs on both sides, you must add another 1.5 cm to the previous measurement. This will come to about 4 cm in total.

NOTE: Again, some decks are not made for pegs. If you still want to mount pegs on those types of decks, you need spacers and a longer shaft.
>