Cougar Kids Adjustable Inline Skates
This roller is ideal for children because it is adjustable. That means you can make the shoe bigger and smaller by a rail that sits under the shoe on the roller skate. Therefore your child will have the opportunity to use the same skating for several years.
The roller skate is available with a delicious Quick-Release locking system perched on the shin, making sure that you are quickly in and out of the roller skates. To lock the foot firmly down in the roller skates, you can tighten the laces bands, so your foot is firmly in the roller skate! On the right roller skate sits the brake mounted
Most rollerskate sizes fit your normal shoe size. This means if you are a size EU 42 in regular shoes, you are very likely to be a size EU 42 in rollerskates too.
When you try on the rollerskate (mostly adults):
Your rollerskates might feel a bit tight at first, but if you follow these tips you will be sure to get a size that fits you. First you have to feel how far your toes reach out in the boot. If they just barely touch the tip, we would say that the rollerskate fits you. However if your toes are sqeezed and are unable to stretch, the rollerskate is too small. To make sure that the rollerskate still fits you just right, after you have used it a bit, try to get in a skating postion with your knees slightly bent og then determine how far your toes reach.
Tips for kids sizes:
Before your child fastens the rollerskate, they should kick their foot forward in the boot. This will give them some room by the heel. If you can fit a pen in that room, the rollerskate is the perfect size. If you can fit a finger, there is room to grow. If you can fit something wider than a finger or a pen - the rollerskate is too big.
Here you can adjust the length of the skate, so that it fits the guiding tips for children above. Remember you have to do this before you fasten the rollerskate.
Rollerskates have to be "worn" a little.
The actual material of the boot can be quite stiff, but will adjust to your feet after you have worn them a little. This usually means a few trips.
Wheelsize:The size of the wheels on a pair of rollerskates is a very important thing to have in mind when you wish to buy a pair. Smaller wheels are easier to maneuver and therefore provides a greater control. Larger wheels are far more durable and keeps up speed better too. Before choosing a wheelsize, you might want to consider how far you want to roll. If you are going on a long trip, bigger wheels are an definit advantage because they keep the pace high and therefor save you some energy. On a shorter trip however, small wheels are smarter because they are easier to maneuver as well as stop. The wheel size depends on the actual rollerskate and what it is used for. In freestyle you often see small wheels, while hockey players use medium sized wheels and then you see big wheels in race rolling and freeride.
Bearings:The bearings are the things that makes the wheels on your rollerskates spin and roll. The quality of the bearings are divided in ABEC-values, and the higher the value, the better the quality. ABEC-5 is the standard bearings. You can get both better and worse quality bearings than these. You usually use ABEC-7, -9 or -11 on a pair of rollerskates, where ABEC-11 is the best. A pair of rollerskates use 16 bearings.
Wheel hardness:The hardness of your rollerskates wheels is measured on the durometer scale, which goes from 0-100 A. 100 A is here the absolute hardest. Harder wheels have a great durability and quickly gains speed. Softer wheels are worn down faster, but a lot more stable than hard wheels.
Blade material:The material of the blade on the rollerskates are typically made of aluminum or plastic. An aluminum blade is very durable and stiff and does not cause as much friction as a plastic one. The plastic blade is not near as durable as the aluminum blade is, but it is cheaper.
Boot material:This is the outer layer of the rollerskate boot. Leather is some of the finest material a boot can be made of and it is also very durable. A leather boot is also the most comfortable. A boot of plastic is also durable and weighs less as well. It provides better stability and control because the material is harder, but is not as comfortable as leather. Some boots are made of mesh, which is used to minimize the heat a bit.
Weight:This is the total weight of the rollerskates. Lighter rollerskates are easier to maneuver with than heavier rollerskates, which can come in handy when rolling along the streets. However, because of that lighter rollerskates are typically more expensive than the heavier rollerskates.